Stanley BR87 User Manual page 6

• Check fastener tightness often and before each use
daily.
• Never operate the tool if you cannot be sure that
underground utilities are not present.
• Do not wear loose fitting clothing when operating the
tool.
• Warning: Hydraulic fluid under pressure could cause
skin injection injury. If you are injured by hydraulic
fluid, get medical attention immediately.
• Keep all body parts away from the working tool.
• When handling material or the tool bit, wear your
(PPE) Personal Protection Equipment.
• Be observant of the hydraulic hoses lying about the
work area, they can be a tripping hazard.
• Always de-energize the hydraulic system when
changing a tool bit.
6 ► BR87 User Manual
SAFETY PRECAUTIONS
• Take caution when changing a tool bit, tool bits can
get very hot.
• Never use the tool in an explosive atmosphere,
sparks from the breaking process could ignite ex-
plosive gas.
• Use proper lifting techniques when handling the tool,
get help from a co-worker and do not over-reach.
• Use proper protection from falling or flying debris,
keep bystanders at a safe distance.
• Do not exceed the rated flow and pressure. See
Specifications in this manual for correct flow rate
and pressure rating. Rapid failure of the internal
seals may result.