Table of Contents
Advertisement
23. Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in a risk of injury.
24. When servicing a tool, use only identical replacement parts. Use of unauthorized parts or failure
to follow maintenance instructions may create a risk of electric shock or injury.
1.
Maintain labels and nameplates on the tool. These carry important information. If unreadable or
missing, contact Harbor Freight Tools for a replacement.
2.
Always wear ANSI approved safety impact eye goggles when using the tool. Using personal
safety devices reduce the risk for injury. Safety impact eye goggles and other safety items are
available from Harbor Freight Tools.
3.
Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate
surrounding work space. Always keep the work area free of obstructions, grease, oil, trash, and
other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not
use this product in a damp or wet location.
4.
When starting a hand-held power tool, always maintain a firm grip on the tool with both hands
to resist starting torque.
5.
Always keep the extension cord away from moving parts on the tool.
6.
Avoid unintentional starting. Make sure you are prepared to begin work before turning on the tool.
7.
Do not force the tool. This tool will do the work better and safer at the speed and capacity for which it
was designed.
8.
Never lay the tool down until the motor has come to a complete stop. The tool may create
unforeseen risk while the motor cycles down.
9.
Never leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and
unplug it from its electrical outlet before leaving.
10. Always unplug the tool from its electrical outlet before performing and inspection, mainte-
nance, or cleaning procedures.
11. WARNING! People with pacemakers should consult their physician(s) before using this product.
Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or
failure of the pacemaker.
WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check
with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify
the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the
tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If
the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.
SKU 92194
Service
Specific Safety Rules
GROUNDING
For technical questions, please call 1-800-444-3353
REV 06/05
Page 4
Advertisement
Table of Contents
