Belkin BoB User Manual page 35

Chapter 5 : Advanced Setup
BoB Advanced Setup Method
TM
Routing Table
Parameter Description
F lags: Indicates the route status:
C = Direct connection on the same subnet.
S = Static route.
R = RIP (Routing Information Protocol) assigned
route.
I = ICMP (Internet Control Message Protocol)
Redirect route .
Network Address: Destination IP address.
Netmask: The subnetwork associated with the
destination.
This is a template that identifies the address bits in
the destination address used for routing to specific
subnets. Each bit that corresponds to a '1' is part of
the subnet mask number; each bit that corresponds
to '0' is part of the host number.
Gateway: The IP address of the router at the next
hop to which frames are forwarded.
Interface: The local interface through which the next
hop of this route is reached.
Metric: When a router receives a routing update that
contains a new or changed destination network entry,
the router adds 1 to the metric value indicated in the
update and enters the network in the routing table.
Page 32