palmOne Zire 31 Read This First Manual page 11

Check your handheld:
Make sure your handheld is on, and then try the following:
1. Tap Home , and then tap HotSync
2. In the HotSync application, make sure of the following:
– Local is highlighted. If it isn't highlighted, tap Local.
– The phrase Cradle/Cable appears. If not,
tap whatever word is there, and then tap
Cradle/Cable in the pick list.
3. To start synchronization, tap the HotSync icon in the middle of the screen.
Already use a Palm OS handheld?
Did you load any third-party applications on your previous Palm OS handheld?
You'll have to update them if they are not compatible with your new handheld.
If any of the following symptoms occur on your new handheld after you
synchronize, remove these applications and contact the vendor for updated
versions: handheld freezes or resets when you open an application; slow
performance; unusual screen display; difficulties using handheld features;
uneven sound quality.
™
in the application list.
Local
HotSync icon
Cradle/Cable