Updating The Unit's Firmware Via The Network - Yamaha RX-V479 Owner's Manual

ZONE A ZONE A ZONE B ZONE B
SLEEP SLEEP
S C E N E S C E N E
BD BD
TV TV NET NET
RADIO RADIO
DVD DVD
STRAIGHT STRAIGHT DIRECT DIRECT ENHANCER ENHANCER BASS BASS
PROGRAM PROGRAM
FM/AM FM/AM
USB USB
INPUT INPUT VOLUME VOLUME
NET NET
BLUETOOTH BLUETOOTH
MUTE MUTE
SETUP
SETUP OPTION O O PTION
ENTER Cursor keys
Cursor keys
ENTER
RETURN RETURN DISPLAY DISPLAY A A
TOP MENU TOP MENU HOME HOME POP-UP/MENU POP-UP/MENU
RED RED GREEN GREEN YELLOW YELLOW L L BLUE BLUE
MEMORY MEMORY
TUNING TUNING TUNING TUNING
PRESET PRESET

Updating the unit's firmware via the network

New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
Note
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
• If the Internet connection speed is slow, or the unit is connected to the
wireless network, network update may not be possible depending on the
condition of the wireless connection. In this case, update the firmware using
the USB memory device (p.98).
• To perform the following procedure, your TV must be connected to the unit via
HDMI. If not, perform the update from the "ADVANCED SETUP" menu (p.98).
• For details on update, visit the Yamaha website.
• You can also update the firmware using the USB memory device from the
"ADVANCED SETUP" menu (p.98).
A firmware update is available if the following message is displayed
after SETUP is pressed.
N e t w o r k U p d a t e
N e w f i r m w a r e a v a i l a b l e .
P r e s s E N T E R t o u p d a t e n o w .
( Y o u c a n a l s o s t a r t t h e u p d a t e
f r o m t h e " S e t u p - N e t w o r k "
s c r e e n . )
C A N C E L : R E T U R N
Language English
You can switch the language.
1
Read the on-screen description and press ENTER.
2
To start the firmware update, press ENTER.
The on-screen display turns off.
3
If "UPDATE SUCCESS PLEASE POWER OFF!"
appears on the front display, press z (power) on the
front panel.
The firmware update is complete.
99
En