How To Output The Display To An Ios Device - Furuno GP-1670F Operator's Manual

Controls, context sensitive menu in WIRELESS CONNECTION SETUP
Control
Others
Search
Ext Antenna (Int Antenna)
Wireless On (Wireless Off)
Connect
Forget
Context-sensitive menu
10.8

How to Output the Display to an iOS Device

You can output the GPS plotter's display to an iOS device (iPhone, iPad), using the
P2N (Plan2Nav) feature and the Jeppesen [Plan2Nav] application for the iOS device.
This lets you monitor the display from a remote location. Requires iOS version 4.3 or
later, and is available only with the GP-1870F.
Download the Plan2Nav application from the App Store then do as follows:
1. Open the menu then open the [GENERAL] and [WIRELESS CONNECTION]
menus to show the [WIRELESS CONNECTION SETUP] dialog box.
2. Select your GPS Plotter (the name begins with "GP" followed by model number
and equipment ID) from the list with the CursorPad then push the ENT key. You
are asked if you are sure to connect to activate the ad hoc connection.
3. Select [Yes] then push the ENT key to activate the connection. "Activating..." ap-
pears in the [Status] column. If the connection is successful, "Activated" replaces
"Activating." and the [Wireless Connection] box appears and shows the name of
the ad hoc connection.
4. Press the ESC/MENU key to return to the [GENERAL] menu.
5. Select [Plan2Nav LINK].
6. Select [On]. If connection to the iOS device is successful, [iOS Device] appears to
the right of [CONNECTED DEVICE] in the [Plan2Nav LINK] menu.
7. Open your iOS device and turn on the Wi-Fi from the [Settings] menu. Select your
GPS Plotter from the [DEVICES] field.
8. Open the Plan2Nav application on your IOS device.
9. At the menu bar at the bottom of the display, find and tap [Chart Plotter Link].
The message "Discovering..." appears while the application tries to connect to your
GPS plotter. If the connection is successful "Playing..." appears momentarily then the
screen shows the display from the GPS plotter. You can zoom in or zoom out by pinch-
ing the screen.
For operation on the Plan2Nav application, see its owner's manual.
Select an access point not shown in the access point
list. The [CONNECTION CONFIGURATION] dialog box
appears. Enter the network name and password to ac-
cess.
Search access points.
Switch between Internal antenna and external antenna
if equipped with an external antenna.
Turn wireless connection on or off.
Operations for saved access points ([Saved] appears in
[Status] column).
[Connect]: Connect to selected access point.
[Forget]: Remove selected access point.
10. OTHER FUNCTIONS
Function
10-11