Furuno GP-1670F Operator's Manual page 165

Matching box (option, required for 1kW transducer)
The optional matching box (Type: MB-1100, Code No.: 000-041-353) is required to-
connect the optional transducers 50B-6, 50B-6B, 200B-5S, 50/200-1T and 50/200-
12M.
Part
Matching Box*
Crimp-on Lug
Cord Lock**
*: With 10P connector cable
**: For connecting two transducers
Jumper block setting
Transducer
J2: No output reduction (default)
50B-6/6B
J1: Output reduction
50kHz
J2
TB2
SHIELD
1
RED
2
RED
3
BLK
200kHz
4
BLK
5
Transducer
Detach grommet;
200B-5S
attach cord lock.
About CAN bus connections
CAN bus is a communication protocol that shares multiple data and signals through a
single backbone cable. You can simply connect any CAN bus devices onto the back-
bone cable to expand your network onboard. With CAN bus, IDs are assigned to all
the devices in the network, and the status of each sensor in the network can be de-
tected. All the CAN bus devices can be incorporated into the NMEA2000 network. For
detailed information about CAN bus wiring, see "Furuno CAN bus Network Design
Guide" (Type: TIE-00170) on Tech-Net), or contact your dealer.
Type
MB-1100
FV1.25-3 (LF)
NC-1
02P6348
Green
J1
(shield)
TB1
WHT
3
2
1
BLK
Connect 10P
connector to
XDR port on
rear of
display unit.
Code no.
000-041-353
000-116-756-10
000-168-230-10
Vinyl Sheath
Taping
13. INSTALLATION
Qty
1
6
1
Crimp-on Lug
FV1.25-3 (LF)
Shield
Shrink Tubing
13-17