Dsc Device Selection; Dsc Message Information; Show/Hide The Dsc Target Id - Furuno GP-1871F Operator's Manual

8.14

DSC Device Selection

1. From the [Home] screen, tap [Settings] => [Interface] => [Select Input Device].
2. Scroll down the menu, then tap [DSC].
3. Select the NMEA format that the radiotelephone uses. Available options are
[NMEA0183] or [NMEA2000 Auto].
4. Close the menu.
8.15

DSC Message Information

Tap a DSC icon to show the DSC message information.
8.16

Show/Hide the DSC Target ID

You can show the AIS target's identification below the AIS symbol.
1. From the [Home] screen, tap [Settings] => [AIS and DSC].
2. Tap the toggle box at [Target ID] to show [ON] or [OFF] as required.
3. Close the menu.
Tap to show message contents Tap to show message contents
8. AIS/DSC OPERATIONS
Vessel name/callsign and
MMSI (where available)
Time/date message was sent,
distance and bearing to sender
Sender's location at time of
transmission
8-5