1 06
Picture and Sound Controls
_
Adjusting the audio
NOTE
.:. Youcantypicallyleave theTVin Stereo modebecause it
outputs
t he
typeof soundbeingbroadcast (stereo or monaural).
•".. If thesoundis noisy,selectMono.
4. If thereis no soundin SAPmode,selectStereo.
Adjustingthe audio balance
You can adjust the audio balance.
1
Press the SETUP button.
2
Select Sound > Balance and press the OK button.
3
Press the "_/1_"(arrow) buttons to adjust the balance.
4
Press the EXIT button.
Adjusting the range
You can adjust bass and treble.
1
Press the SETUP button.
2
Select Sound > Bass or Treble.
3
Press the OK button.
4
Press the "_/1_ (arrow) buttons to adjust the range.
5
Press the EXIT button.
IV Speakers On/Off
This feature allows you to turn the TV speakers off when connecting the
audio system.
1
Press the SETUP button.
2
Select Sound > TV Speakers and press the OK button.
3
Press the A/V (arrow) buttons to select On or Off.
To turn on the built-in speakers:
1
Choose On in step 3 above.
Setting the Primary Audio Language
You can set the Primary Audio Language of the digital broadcast.
1
Press the SETUP button.
2
Select Sound > Primary Audio Language
and press the OK
button.
3
Press the A/!'
(arrow) buttons to select English, Franqais, or
Espafiol.
4
Press the EXIT button.