3
Press the p / q (arrow) buttons to select Stereo.
4
Press the EXIT button.
NOTE
Adjusting the audio balance
You can adjust the audio balance.
1
Press the SETUP button.
2
Select Sound > Balance and press the OK button.
3
Press the t / u (arrow) buttons to adjust the balance.
4
Press the EXIT button.
Adjusting the range
You can adjust bass and treble.
1
Press the SETUP button.
2
Select Sound > Bass or Treble.
3
Press the OK button.
4
Press the t / u (arrow) buttons to adjust the range.
5
Press the EXIT button.
TV Speakers On/Off
This feature allows you to turn the TV speakers off when connecting the
audio system.
1
Press the SETUP button.
2
Select Sound > TV Speakers and press the OK button.
3
Press the p / q (arrow) buttons to select On or Off.
To turn on the built-in speakers:
1
Choose On in step 3 above.
Setting the Primary Audio Language
You can set the Primary Audio Language of the digital broadcast.
1
Press the SETUP button.
2
Select Sound > Primary Audio Language and press the OK
You can typically leave the TV in Stereo mode because it outputs the
❖
type of sound being broadcast (stereo or monaural).
If the sound is noisy, select Mono.
❖
If there is no sound in SAP mode, select Stereo.
❖
Picture and Sound Controls
Adjusting the audio
103