Table of Contents
Advertisement
LOCK/UNLOCK COMMANDS AND
ALARM SYSTEM ARMING/DISARMING
If your vehicle is equipped with electric door locks, several functions can be operated by remote control.
These features are optional and may require purchasing additional equipment. Consult your dealer for
advice.
Arming and disarming the security system also controls Lock/Unlock functions.
Following systems can be controlled:
•
Door locks.
•
Trunk or hatchback release.
•
Interior lights.
LOCK / ARM
Press the
button, doors are locked and alarm system is armed, parking lights flash once and siren
chirps once to confirm command has been received and that none of the protected zones are in violation.
Parking light confirmation is sent as many times as command is repeated so you are sure that system has
received the command. Audible confirmation is also repeated (siren or horn depending on programming) if
option "Confirmation on 2nd lock" is activated (during installation).
If a zone is in violation during arming, confirmation is different (3 flashes or chirps) to warn you. See table
of alarm codes to know which zone is in violation.
UNLOCK / DISARM
Press the
button, doors are unlocked and alarm is disarmed, parking lights flash and siren chirps
twice to confirm command has been received and that no alarm condition was generated during your
absence.
If there was a violation, confirmation is different (4 flashes or chirps) to warn you. See table of alarm codes
to know which zone generated alarm condition.
The "Unlock" function can be programmed and connected in such a way that the first Unlock command
only unlocks the driver's door, while a following Unlock command unlocks the other door(s).
Dome light will turn on for 30 seconds every time Unlock command is sent (not applicable in semi-passive
mode and only if option is hookup).
This 30-second duration is cancelled when Lock command or Trunk command is sent, brakes are applied
or key is inserted in ignition and turned to "ON" position.
13
Advertisement
Table of Contents
