Power Management Setup - ECS H61H2-I5 Manual

Power Management Setup

This page sets up some parameters for system power management operation.
Main Advanced
Power Management Setup
Resume By RING
Resume By PME
Resume By USB 1.x/2.0 (S3)
Resume By PS2 KB (S3)
Resume By PS2 MS (S3)
EUP Function
Power LED Type
Resume By RING (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You
must use an ATX power supply in order to use this feature.
Resume By PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use this
item to do wake-up action if inserting the PCI card.
Resume By USB 1.x/2.0(S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow mouse activity to awaken the system
from power saving mode.
EUP Function (Enabled)
This item allows user to enable or disable EUP function.
Power LED Type (Dual Color LED)
This item shows the type of the power LED.
Press <Esc> to return to the Advanced Menu page.
14
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Chipset M.I.B III Boot
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Dual Color LED]
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
H61H2-I5 USER MANUAL
Security Exit
About Resume by Ring
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit