Boot Menu - ECS H61H2-I5 Manual

Boot Menu

This page enables you to set the boot device priority.
Main Advanced Chipset M.I.B III
Boot Configuration
Operation System Select
Launch PXE OpROM
Launch Storage OpROM
Fast Boot
Bootup NumLock State
Quiet Boot
Boot mode select
Set Boot Priority
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
Boot Option #7
USB Flash Drive Priorities
Boot Configuration
This item shows the information of the boot configuration.
Operation System Select (Windows7 or other OS)
This item is used to select the operation system.
Launch PXE OpROM (Disabled)
Use this item to enable or disable the PXE OpROM.
Launch Storage OpROM (Enabled)
Use this item to enable or disable the Storage OpROM.
Fast Boot (Disabled)
Use this item to enable or disable the fast boot.
Bootup NumLock State (On)
This item determines if the NumLock key is active or inactive at system start-up
time.
Quiet Boot (Enabled)
This item determines if the NumLock key is active or inactive at system start-up
time.
Boot mode select (LEGACY)
Use this item to select boot mode.
Boot Option #1/#2/#3/#4/#5/#6/#7/ (Hard Disk / CD/DVD / USB/Floppy / USB CD/DVD
/ USB HardDisk / USB Flash / Network)
These items show the boot priorities.
32
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Boot
[Windows 7 or other OS]
[Disabled]
[Enabled]
[Disabled]
[On]
[Enabled]
[LEGACY]
[Hard Disk]
[CD/DVD]
[USB/Floppy]
[USB CD/DVD]
[USB Hard Disk]
[USB Flash:JetFlashTS4GJFV20 0.00]
[Network]
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
H61H2-I5 USER MANUAL
Security Exit
Windows 7 or other OS: Boot
policy for Legacy OS
Windows 8: Boot Policy for UEFI
OS without Compatibility Support
Module (CSM)
Manual: User customized CSM
parameters & boot policy
:Select Screen
:Select Item
Enter : Select
+/- : Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit