User Password; Save & Exit Setup; Exit Without Saving - ECS 945GZT-M Manual

User Password

This page helps you install or change a password.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Security Settings
User Password
Change User Password
: Move
F1:General Help
User Password (Not Installed)
This item indicates whether a user password has been set. If the password has been installed,
Installed displays. If not, Not Installed displays.
Change User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password. This item will show if the supervisor password is
set.
Press <Esc> to return to the main menu setting page.
Save & Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the Setup
Utility and exit the Setup Utility. When the Save and Exit dialog box appears, select [OK]
to save and exit, or select [Cancel] to return to the main menu.

Exit Without Saving

Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box appears,
select [OK] to discard changes and exit, or select [Cancel] to return to the main menu.
If you have made settings that you do not want to save, use the "Discard
Changes and Exit" item and select [OK] to discard any changes you have made.
User Password
: Not Installed
Press Enter
Enter : Select +/-/: Value F10: Save and Exit
F9: Optimized Defaults
ESC: Exit
Using BIOS
Help item
Install or Change the
password.
41