Pci/ Pnp Configuration - ECS 945GZT-M Manual

PCI / PnP Configuration
This page sets up some parameters for devices installed on the PCI bus and those utilizing
the system plug and play capability.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Init Display First
Allocate IRQ to PCI VGA
: Move
F1:General Help
Init Display First (PCI Express Card)
Use this item to select which graphics controller to use as the primary boot devices.
Allocate IRQ to PCI VGA (Yes)
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics system. You set this
value to No to free up an IRQ.
Press <Esc> to return to the main menu setting page.
PCI / PnP Configuration
PCI Express Card
Yes
Enter : Select
+/-/: Value F10: Save and Exit
F9: Optimized Defaults
ESC: Exit
Using BIOS
Help Item
Select which graphics
controller to use as the
primary boot device.
37