Pyrolytic: Automatic Oven Cleaning - Smeg SFPA140 Instruction Manual

4.10 Pyrolytic: automatic oven
cleaning
Pyrolytic is an automatic high-
temperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Remove the upper guard (where
present).
• Close the door.
Cleaning and maintenance
Pyrolytic function setting
1. Select the pyrolytic or eco pyrolytic
option from the special functions menu.
2. If required, press the
select a different duration from the preset
one.
The duration can be changed from
a minimum of 2 hours to a
maximum of 3 hours (except for the
function whose duration is
120 minutes).
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
• Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.
symbol to
45