Reprogramming Procedure - Sharp XV-Z9000U Supplemental Service Manual

Hide thumbs Also See for XV-Z9000U:

ËReprogramming procedure

Requirements on the programming PC

OS: Windows95, 98 or NT4.0

RS232C terminal (No problem if compatible with SVM or SAPS)

For this programming, the operator must be able to do the following levels of running the computer.

Opening specified folders on a "Windows95/98" machine.

Double-clicking to run files.

Decompressing "Zip" files.

In the screen displays below, the circle means that you move the cursor there and click the mouse,

where the circle indicates that you look there and confirm.

Reprogramming for the projector

Installing the write program and the data program

The "TeraTermPro" communication program is used for this programming.

Note:

If your computer already has the "TeraTermPro" program installed, once uninstall this program and

reinstall it in the following procedure. (This is because the program may fail to work depending on the

computer's operating environment.) Refer to Paragraph 2) at the end of this manual.

1) Installing the TeraTermPro program

a. Decompress the attached "ttermp23.zip" file and click on the "setup.exe" file in the folder.

b. The "Language" box shows up. Click on [English].

XV-Z9000U/E

SUPPLEMENT

Xv-z9000e