• Do not use extension cords to connect the UPS to an AC outlet. Your warranty will be voided if anything other than Tripp Lite surge suppressors are used to connect your UPS to an outlet. • If the UPS receives power from a motor-powered AC generator, the generator must provide clean, filtered, computer-grade output.
Use one of the additional jumper cords supplied with the UPS, or order additional jumper cords from Tripp Lite. Call (773) 869-1234; order part # P004-006. * Your UPS is designed to support only computer equipment. You will overload the UPS if the total VA ratings for all the equipment you connect exceeds the UPS’s output capacity (see Specifications).
All UPS models come with a robust internal battery system; select models feature connectors that accept an optional external battery pack (sold separately from Tripp Lite*) to provide additional runtime. Adding an external battery will increase recharge time as well as runtime.
Allow the UPS to recharge continuously for 2-4 hours, and repeat the self-test. If the LED continues to flash, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com/support/battery/index.cfm to locate the specific Tripp Lite replacement battery for your UPS.
UPS batteries need to be recharged or replaced. Allow the UPS to recharge continuously for at least 4 hours, and repeat the self-test. If the LED continues to flash, contact Tripp Lite for service. If your UPS requires battery replacement, visit www.tripplite.com/support/battery/index.cfm to locate the specific Tripp Lite...
Page 7
USB Port: The USB port connects your UPS to any USB workstation or server. Using this port, your UPS can communicate “line-fail” and “low-battery” status to your computer. Use with Tripp Lite software and any USB cable to automatically save open files and shut down equipment during a blackout.
Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB at 1MHz); AC Protection Modes (H to N, H to G, N to G). Battery runtime for OMNIVSINT1500XL can be extended with the addition of a single optional Tripp Lite External Battery Pack which is not expandable (model # BP24V14, sold separately).