Setting Change (Function Customization) - Mazda 2008 MX-5 Miata Owner's Manual

MX-5_8X49-EA-07F_Edition2 Page79
Monday, June 25 2007 11:18 AM

Setting Change (Function Customization)

The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
Setting
Advanced key battery
dead indicator
Lock/unlock operation
confirmation beep
*1
sound
*2
Autolock function
*1: When the autolock function is operating, the warning sound will be heard regardless of the setting.
*2: When Autolock function is enabled, windows will not automatically close. You must close before leaving
vehicle.
Form No.8X49-EA-07F
Advanced Keyless Entry and Start System
Function
KEY indicator light (green) flashes to indicate
that the advanced key battery power is low.
A beep sound is heard to confirm that both doors
or the trunk lid have been locked/unlocked.
When both doors are closed and the advanced key
is being carried and out of operational range, both
the doors automatically lock after 3 seconds.
(Even if the driver is in the operational range,
both doors are locked automatically after about 30
seconds.)
Black plate (79,1)
Knowing Your Mazda
After Setting
At Initial Setting
Change
Activated Deactivated
Activated Deactivated
Deactivated Activated
3-19