Mazda 2008 MX-5 Miata Owner's Manual page 234

MX-5_8X49-EA-07F_Edition2 Page234
Monday, June 25 2007 11:19 AM
Interior Comfort
Audio System
qOperating the Radio
Band selector button
Electric serial number switch
Seek tuning/APC switch
Radio ON
Press a band selector button (
turn the radio on.
Band selection
Successively pressing the band selector
button ( ) switches the bands as
follows: FM1→FM2→AM.
The selected mode will be indicated. If
FM stereo is being received, ST will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
"ST" indicator will go out.
6-26
Form No.8X49-EA-07F
Satellite button
Scan/Auto memory switch
Tuning
) to The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be canceled.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pulling up or pressing down the seek
tuning/APC switch will cause the tuner to
seek a higher or lower frequency
automatically.
Black plate (234,1)
Display Manual tuning dial
Channel preset switches