Mazda 2007 Mazda6 Sports Sedan Owner's Manual page 313

Mazda6_8W54-EA-06G_Edition1 Page312
Tuesday, July 25 2006 1:54 PM
Maintenance and Care
Owner Maintenance
(Sport Wagon)
1. Remove the liftgate upper trim and
high-mount brake light component.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
License plate lights
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens.
8-46
Form No.8W54-EA-06G
Black plate (312,1)
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
Replacing Interior Light Bulbs
Overhead light/Map lights (With
overhead console)
1. Remove the screws.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
3. Turn the socket and bulb assembly
counterclockwise and remove it.