Mazda 2007 Mazda6 Sports Sedan Owner's Manual page 254

Mazda6_8W54-EA-06G_Edition1 Page253
Tuesday, July 25 2006 1:53 PM
Removing a Flat Tire
1. If your vehicle is equipped with a
wheel cover, pry off the wheel cover
with the beveled end of the lug wrench.
NOTE
Force the end of the lug wrench firmly
between wheel and cover, or removal
will be difficult.
CAUTION
Align the notch on the wheel cover
with the valve stem when installing it.
Notch
Tire valve
Damage could occur during installation
if the wheel cover is not properly
aligned.
Form No.8W54-EA-06G
Black plate (253,1)
In Case of an Emergency
2. Loosen the lug nuts by turning them
counterclockwise one turn each, but
don't remove any lug nuts until the tire
has been raised off the ground.
3. Place the jack under the jacking
position closest to the tire being
changed.
Jacking position
Flat Tire
7-9