Mazda6_8W54-EA-06G_Edition1 Page308
Tuesday, July 25 2006 1:54 PM
Maintenance and Care
Owner Maintenance
3. Turn the center section of the plastic
retainers counterclockwise and remove
them, and partially peel back the
mudguard.
Removal
Installation
4. Turn the socket and bulb assembly
counterclockwise and remove it.
5. Disconnect the bulb from the socket.
8-42
Form No.8W54-EA-06G
Black plate (308,1)
Brake lights/Taillights, Rear turn signal
lights
(Sedan)
1. Pull the center section of the plastic
retainer and remove the retainers and
partially open the trunk side trim.
Removal
Installation
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
Brake lights/Taillights