Submenu
Setting
SERIAL REMOTE
Selects the mode to be used.
• OFF: SERIAL REMOTE does
• ETHERNET: The monitor is
• RS-232C: The monitor is
MONITOR
Set the monitor setting.
CONNECTION
Sets the connection of the monitor
and the controller.
KEY INHIBIT menu
KEY INHIBIT
K E Y I N H I B I T :
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set to ON, all items are displayed in black,
indicating the items are locked.
not function.
controlled by the command
of Ethernet.
controlled by the command
of RS-232C.
MONITOR ID: Sets the ID
of the monitor.
GROUP ID: Sets the group
ID of the monitor.
IP ADDRESS: Sets the IP
address.
SUBNET MASK: Sets the
subnet mask.
(255.255.255.000)
DEFAULT GATEWAY:
Sets the default gateway on
or off.
ADDRESS: Sets the default
gateway.
CANCEL: Selects to cancel
the setting.
CONFIRM: Selects to save
the setting.
PEER TO PEER: for one
to one connection
LAN: for connection via a
network
xx
USER MEMORY menu
U S E R M E M O RY 1 / 3
x0 1 U S E R 0 1
· 0 2 U S E R 0 2
· 0 3 U S E R 0 3
· 0 4 U S E R 0 4
· 0 5 U S E R 0 5
· 0 6 U S E R 0 6
· 0 7 U S E R 0 7
· 0 8 U S E R 0 8
U S E R M E M O RY 2 / 3
x0 9 U S E R 0 9
· 1 0 U S E R 1 0
· 1 1 U S E R 1 1
· 1 2 U S E R 1 2
· 1 3 U S E R 1 3
· 1 4 U S E R 1 4
· 1 5 U S E R 1 5
· 1 6 U S E R 1 6
U S E R M E M O RY 3 / 3
x1 7 U S E R 1 7
· 1 8 U S E R 1 8
· 1 9 U S E R 1 9
· 2 0 U S E R 2 0
Submenu
Setting
01 to 20
You can save the setting of the following
functions.
• CONTRAST
• BRIGHTNESS
• CHROMA
• PHASE
• SCAN
• ASPECT
COLOR TEMP/SPACE menu
• COLOR TEMP
• ADJUST GAIN
• ADJUST BIAS
• COLOR SPACE
USER CONTROL menu
• APERTURE
SYSTEM SETTING menu
• GAMMA
• I/P MODE
Saving the user memory
You can save the 20 picture settings with the name. To
load the picture in the saved setting, see "Loading USER
MEMORY" on page 70.
79
Adjustment Using the Menus