Multi Display Setting - Sony LMD-1951MD Instructions For Use & Warranty

Submenu Setting
FORMAT DISPLAY Selects the display mode of the
signal format and scan mode.
• AUTO: The format is displayed
• ON: The format is always
• OFF: The display is hidden.
LANGUAGE Selects the menu or message
language from among seven
languages.
• ENGLISH: English
• FRANÇAIS: French
• DEUTSCH: German
• ESPAÑOL: Spanish
• ITALIANO: Italian
•
•
POWER SAVING Sets the power saving mode on or
off. When you set to ON, the
monitor goes into power saving
mode if no signal is input for about
one minute.
I/P MODE (picture delay Selects to set the delay by the
minimum) picture processing to the minimum
level when the interlace signal is
input.
• INTER-FIELD
• FIELD MERGE: The
• LINE DOUBLER: The
*1
When MULTI DISPLAY
ENABLE is set to ON, INTER-
FIELD cannot be selected.
for about 10 seconds when
the input of the signal starts.
displayed.
: Japanese
: Chinese
*1
: Mode for
giving precedence to the
picture quality. Performs
interpolation depending on
the movement of the images
between the fields. It takes
longer than "FIELD
MERGE" or "LINE
DOUBLER" for processing
the picture. "INTER-
FIELD" is the factory
setting.
processing time is shorter.
Combines the lines in the
odd fields and even fields
alternately regardless of the
movement of images.
Suitable for viewing still
images.
processing time is shorter.
Performs interpolation by
repeating each line in the
data receiving sequence
regardless of the field. As
the line flicker is displayed
in this mode, it is available
for checking the line flicker
of the telop work and so on.
Submenu Setting
BACKGROUND Sets the brightness of the black bars
appearing in the upper and lower
positions of the screen, or on the
sides of the screen.
• OFF: Displays a darker bar
• ON: Displays a brighter bar
SD PIXEL MAPPING Selects SD picture size (pixels)
according to input signal format.
• COMPOSITE&Y/C: Set to
• RGB/COMPONENT: Set to
When picture signals in the
When picture signals in the
SPLASH LOGO Sets the splash logo display mode
on or off. To display the splash
logo, you need to write the splash
logo data. For details, consult your
Sony dealer.

MULTI DISPLAY SETTING

USER CONFIG – MULTI DISPLAY SETTING
M U LT I D I S P L AY E N A B L E :
S U B I N P U T S E L E C T :
P O S I T I O N :
S U B P I C T U R E S I Z E :
(black).
(gray).
monitor the signal input
through the COMPOSITE
IN connector or Y/C IN
connector.
monitor the signal input
through the R/G/B IN
connector or Y/P /P IN
B R
connector.
size of 720 × 576 (50i)
(or 720 × 487 (60i)) are
input
Select 720 × 576 (or 720 ×
487). This is the default
setting.
When 702 × 576 (or 712 ×
483) is selected, all sides of
the input picture are cut off
by several pixels.
size of 702 × 576 (50i)
(or 712 × 483 (60i)) or
equivalent are input
Select 702 × 576 (or 712 ×
483).
When 720 × 576 (or 720 ×
487) is selected, a black
border (of several pixels
wide) appears around the
input picture.
xxx
xxx
x
x
75
Adjustment Using the Menus