Maytag MAF 9801 Use And Care Manual page 30

CELSIUS OR FAHRENHEIT
The temperature is shown in the display either
in degrees Celsius or in degrees Fahrenheit.
You can change between Celsius and Fahren-
heit as follows:
Turn off the main power switch
then turn it on again so that the machine is in
stand-by mode.
Press the
Enter
press the button five times. These ten pres-
P2
ses must be completed within 15 seconds.
Within three seconds after pressing the
button for the last time, you must then use the
buttons to index to your desired al-
ternative.
RESET PROGRAMME
If you wish to revert to the settings which a pre-
set programme had at the time when the dryer
was supplied, you can reset the programme.
1. Hold down the programme button (P1-P4)
for the programme that you wish to reset.
2. Press the
Enter
3. Release the programme button.
The programme for the button concerned
will now have reverted to its settings at the
time when the dryer was supplied.
30
button five times, and then
button once.
and
P2