Wheel And Tire Preparation 輪胎及輪轂; Using Different Batter Configurations 電池尺寸規範 - THUNDER TIGER Jackal 6544-F Instruction Manual & Parts Catalogue

2
WHEEL AND TIRE PREPARATION 輪胎及輪轂
a
a. Remove wheel lock nut using the 4-way wrench and detach wheels.
b. Replace fresh tires and wheels if the original tires are worn out.
c. Tighten the wheel lock nut.
Make Sure The Axle Nuts Are Tight Before Each Run
Before operating your Jackal, take a moment to make sure the axle nuts are tight,
as they may have loosened during shipping. The correct size axle-nut wrench is
supplied with the truck. Check the tightness of the axle nuts before each run. The
Jackal's high speed and torque can loosen the nuts over time if left unchecked.
a. 使用內 附 之六角螺帽套筒板手將輪轂上六角固定螺帽取下。
b. 將已磨損嚴重之輪胎組取下後，換上新的輪胎組。
c. 將六角固定螺帽重新鎖緊。
輪胎鎖附步驟加註注意事項
在操作之前請先確認輪胎之固定六角螺帽是被鎖緊的。如未鎖緊，可使用隨車所 附 的螺帽套筒扳手將螺帽鎖緊。每趟跑完或是再次
出發前請務必檢查固定螺帽是否鬆脫？此車之高轉速與高扭力很可能於每一次的操作時使螺帽漸漸地鬆脫。
3
USING DIFFERENT BATTER CONFIGURATIONS 電池尺寸規範
a
a. From the factory, the compartments are configured to accept the standard sized battery pack shown. (147 x 50 x 30mm)
b. JACKAL battery box has velcro bundling strap can help to fix battery.
c. Put battery into battery box, tight battery with velcro bundling strap to fix battery.
a. 原廠建議使用為如圖示尺寸之電池。(147 x 50 x 30mm)
b. JACKAL電池盒備有束帶可協助固定不同尺寸之電池。
c. 使用方式為放入電池後，將束帶穿過方環向上拉緊，再往回貼合（本束帶為勾毛同體）。
b
b
Std. battery
dimension
標準電池尺寸
3
c
c