Table of Contents
Advertisement
Surface
Cooking
(continued)..............................
Surface Indicator Lights
Coil Elements
There is an indicator light under each pair of control knobs.
• When an element is turned on, it will cycle on and off
When one or both of the surface control knobs is turned on,
to maintain the heat setting.
the light will turn on. The light will turn off when the surface
• Coil elements are self-cleaning.
element(s) is turned off.
• Do not immerse in water.
To remove: When cool, raise element. Carefully pull out
Hot Surface Lights
and away from receptacle.
(glass-ceramic cooking surface
j__
,,
models only)
Each element has a hot /
....
__
surface
indicator
f
_'o_Ugoo_:roP "_'_,_I
light. A light will be _
/
//_
illuminated when the
_"'-_
J/
matching surface element is
__
hot. It will remain on, even after the
_
To replace: Insert terminals on the element into receptacle.
control is turned off, until the area has
Guide the element into place. Gently press down on the outer
cooled. They are located at the front center of the cooktop,
edge of the element until it sits level on the drip bowl.
Coil Element Surface
(select
models)
i ;:i!
TERMINALS
Lift-up Porcelain Cooktop
To prevent the cooktop from discoloring or staining:
Drip
Bowls
•
Clean cooktop after each use.
The drip bowls, located under each surface element, are
•
Wipe acid or sugar spills as soon as the cooktop has
designed to catch boilovers and must always be used. Ab-
cooled as these spills may discolor or etch the
sence of these bowls during cooking may damage wiring or
porcelain,
other parts underneath the cooktop.
ii :;Z!i
Your range features an upswept porcelain cooktop that can be
To prevent the risk of electric shock or fire, never line drip
lifted up for convenient access to the area under the cooktop,
bowls with aluminum foil.
To lift eooktop:
When cool, grasp the front edge of the
Drip bowls will discolor or craze over time, if overheated.
cooktop. Gently lift up until the two support rods at the front
This discoloration or crazing is permanent. However, it will
.....
of the cooktop snap into place.
not affect cooking performance.
\
///_
*
TOprotect drip bowl finish:
: ::
, Avoid using high heat settings for long periods of time.
......
• Do not use oversized cookware. Pans should not
',
,_
SUPPORTROD
_2
I\
extend more than 1-2 inches beyond the element.
• When home canning, use the Canning Element (Model
To lower eooktop: Hold the front edge of the cooktop and
CE1). Contact your Maytag dealer for details.
carefully push back on each support rod to release. Then
• Clean frequently. (See cleaning section, page 17.)
gently lower the top into place. The support rods will slide
into the range frame.
!! iiSi;
9
Hide quick links:
Advertisement
Table of Contents
