Connection With 1/4" Cables; Footswitch Connection - Behringer MiniFex FEX800 User Manual

MINIFEX FEX800
Fig. 5.1: Insert cable with two 1/4" TS and one 1/4" TRS connector

5.2 Connection with 1/4" cables

To wire the MINIFEX in series with other equipment or via the aux paths of a mixing console, please
use 1/4" cables, sometimes also referred to as patch cords. These cables have a 1/4" connector at
each end. Connect the aux send outputs of your console to the inputs, and the aux returns to the
outputs of the MINIFEX. You can also connect balanced stereo 1/4" cables to the MINIFEX outputs.
Fig. 5.2: Unbalanced cable with 1/4" TS connectors

5.3 Footswitch connection

The MINIFEX features a jack for connecting a footswitch. Here, you can connect any standard
footswitch with a 1/4" TS connector. As some footswitch models on the market have a different
polarity, please be sure to use one that is appropriately wired. The correct wiring is shown in the
illustration below.
Fig. 5.3: Wiring of a 1/4" TS connector for footswitch connection
13
5. AUDIO CONNECTIONS