Using The Phonebook; Chain Dialing - Uniden D3097 Series User Manual

Using Call Waiting
If you get a Call Waiting call, the phone can sound a tone and display any CID
information received for the waiting call. Press TALK/FLASH to switch between your
current call and the waiting call; remember, each time you switch, there is a short
pause before you're connected to the other caller.

Using the Phonebook

Each handset can store up to 200 entries in its phonebook.
To...
open/close the phonebook PHONEBOOK.
scroll through the entries
jump to entries that start
with a certain letter
dial the current entry
edit the current entry
delete the current entry
Adding/Editing Phonebook Entries
To add a new phonebook entry (with the phone in standby), open the phonebook.
Press MENU/OK and select
personal ring.
To add the current number to the phonebook, press MENU/OK and select
Pb. The Edit Name
 Enter the phone number (up to 32 digits) exactly as you would dial it.
 If you need to enter a pause between the numbers, press REDiAL/PAUSE; you'll
see P in the display. (The dialing will pause for about 2 seconds per a digit.)
 To edit the number, press END/CLEAR or MUTE/DELETE to back up the cursor and
delete numbers. Re-enter the correct numbers.
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Press MENU/OK. Select
To confirm, select Yes.

Chain Dialing

If you often have to enter a series of digits or a code number during a call, you can
save that code number as a regular phonebook entry and use the phonebook to
send the code number.
1. Make your call normally. When you hear the prompt that asks you to enter
your code number, open the phonebook and find the entry.
2. Press MENU/OK to send the code. If you change your mind, just close the
phonebook.
12 - English
Downloaded from www.Manualslib.com
Press...
DOwN to scroll through the entries from A to Z.
UP to scroll from Z to A.
the number key corresponding to the letter you want.
TALK/FLASH or SPEAKER.
MENU/OK, then select Edit.
MENU/OK, then select Delete. To confirm, select Yes.
Create New.
screen displays. Edit the information.
manuals search engine
Enter a name and number, then select a
Store into
Delete All.