Fujitsu M10 Installation Manual page 148

Figure 3-82 Mounting in the rack
FRONT
9.
Secure the PCI expansion unit in the rack.
a. Push out the left and right slide locks on the front cover (C in
b. Tighten the two M6 screws at two locations on the front of the PCI expansion
c. Insert the left and right hooks on the inside of the bottom of the front cover
Note - A label with the serial number of the PCI expansion unit is affixed to the front cover.
Be sure to attach the front cover to the corresponding chassis.
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
134
C
A
release the locks, and remove the front cover.
unit (A in Figure 3-83) to secure it to the rack.
into the grooves at the bottom front of the PCI expansion unit to attach the
front cover.
A
FRONT FRONT
B
Figure 3-82) to