Fujitsu M10 Installation Manual page 118

Figure 3-36 Type-2 cable support
Reference: Old
2.
Confirm that the rack is fixed in place to prevent the rack from toppling over.
For details, see
3.
Confirm the chassis mounting location in the rack. If necessary, mark the
location on the supporting columns.
The mounting locations have been predetermined for the building block
configurations. See
4.
Step 4 differs depending on the shape of the supporting column holes of the
rack. Perform the work appropriate to the shape of the supporting column
holes of the rack.
For racks with supporting columns having angled holes
Attach cage nuts to the left and right supporting columns of the rack.
- Attachment locations in the front supporting columns: (From the bottom) 1U
- Attachment locations in the rear supporting columns: (From the bottom) 1U
Fujitsu M10/SPARC M10 Systems Installation Guide ･ July 2015
104
New
"3.3.2 Securing the
Figure 2-3
center, 2U bottom, and 3U top
center and 2U center
rack."
in "2.4.1 Mounting conditions for general racks."