Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
■
About shock
5.2.4
Drive Enclosure Rack Installation Procedure
This section describes how to install a drive enclosure in a rack.
IMPORTANT
Procedure
1
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Do Not
CAUTION
•
Do not handle the drive enclosure roughly or subject it to physical
shocks when laying it down.
•
Do not stack the drive enclosures.
•
Do not knock or drop the drive enclosure on hard objects.
Do
CAUTION
•
If drive enclosures are installed in a way other as described herein,
damage and/or device failure or electrical shock may occur.
•
Do not install drive enclosures with cables, such as power cords,
connected.
•
Do not knock the other devices installed in the rack when installing
drive enclosures.
•
Connect the cables after installing the drive enclosure in a rack by
following the "Add Drive Enclosure" procedure of ETERNUS Web GUI.
•
Install the disk after expanding the drive enclosure.
Wear a wrist strap or touch a metal part to discharge the human body's natural
static electricity.
Copyright 2014 FUJITSU LIMITED
64
P3AM-5512-07ENZ0