GE 90*-30 PLC Series User Manual page 78

Interface between a series 90-30 programmable logic controller (plc) and a lonworks network bus interface module
Hide thumbs Also See for 90*-30 PLC Series:
Table of Contents

Advertisement

GFK-1322
Name
Netid
Network
Network Adapter
Network Address Name
Node
Octet
One-Way Propagation Time
Path
Peer
Peer-Peer
Physical Address
Protocol
Protocol Data Unit (PDU)
Remote Station
Repeater
Responding Station
Round-Trip Propagation Time
Router
Appendix D Glossary
Usually, this refers to the Network Address Name. For Distributed
Directory Protocol operation, this can sometimes refer to a Long-
Form name, which is a combination of a Network Address Name and
a specific Device Name at that network adapter.
The netid is the part of the IP address identifying the network on
which the node resides. (See also Hostid.)
An arrangement of nodes and interconnecting branches.
The device, such as the Ethernet Interface, providing
communications services for a particular network.
A character string that is used in lieu of an actual IP address. The
client device uses Name Resolution to resolve this symbolic name
into the actual IP address. This name represents the address on the
network of a particular network adapter.
The physical module that connects a node to the network. The
Ethernet Interface is an example of a node. It connects a station (PLC
or CNC) to a network (Factory LAN). A station may contain more
than one Ethernet Interface and therefore contain more than one
node.
A group of 8 bits operated on as a single unit. (See also Byte.)
See Transmission Path Delay.
The sequence of segments and repeaters providing the connectivity
between two DTEs. In CSMA/CD networks, there is one and only
one path between any two DTEs.
Another entity at the same level (layer) in the communication
hierarchy.
Communication between nodes at the same level or layer in the
hierarchy.
The unique physical layer address associated with a particular node
on the Local Area Network (LAN). Ethernet physical addresses are
typically assigned by the manufacturer. (See for comparison, Internet
Address.)
A set of rules for exchanging messages between two communicating
processes.
Information that is delivered as a unit between peer entities of a local
area network (LAN) and that contains control information, address
information, and may contain data.
Station located elsewhere on the network. (See also "Local Station")
In a Local Area Network, a device that amplifies and regenerates
signals to extend the range of transmission between network nodes or
to interconnect two or more segments.
A station which generates a message in response to a command that
was directed to the station.
Twice the time required for a bit to travel between the two most
distant nodes in a bus network.
NOTE: In a network using carrier sense, each frame must be long
enough so that a collision or jam signal may be detected by the
transmitting node while this frame is being transmitted. Its minimum
length is therefore determined by the round-trip propagation time.
A device similar to a bridge that allows access to multiple LANs.
(Also known as a gateway in Internet terminology.)
D
D-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents