Module Configuration - GE 90*-30 PLC Series User Manual

4
4-6

Module Configuration

When choosing to open a new configuration, the program will call the module
configuration screen. It will be necessary to define the general parameters of the module
before defining network variables. The module configuration information can be edited
after network variable assignments have been made by choosing Configuration under the
View menu in the Reference Configuration screen.
Program ID
:
The program ID assignment serves two functions. The first is the filename by which this
configuration is saved. For this reason, the program ID name must conform to DOS file
naming conventions and contain no more than 8 characters. The other function served
by the program ID is to provide the LONTALK external interface file identification for
the L W network. The program ID can be accessed by network management tools
ON ORKS
to identify a particular configuration in a LBIM during network commissioning.
Series 90™-30 PLC LONWORKS® Bus Interface Module User's Manual – June 1997 GFK-1322A