4. Using the belt to raise rear of the drum, release the
ball from the hitch and move the drum out the front.
Removing the belt:
1. Disconnect the dryer from electrical supply.
2. Remove the top and the front panels.
3. Release the belt from the motor.
4. From the front, slightly raise the front of the drum and
slide the belt off the drum.
Removing the ball hitch from the drum:
1. Disconnect the dryer from electrical supply and
remove the drum.
2. Remove the (3) screws from inside the drum holding
the ball to the drum.
Removing the teflon glides:
1. Disconnect the dryer from electrical supply and
remove the front panel.
2. Squeeze the tabs, holding the glides to the rim of the
drum, to release the glides.
Removing the drum heat shield: (Electric
dryers)
1. Disconnect the dryer from electrical supply and
remove the drum.
74