2. Remove the two screws that secure the hinge to the
front panel. NOTE: Remove the bottom screw first.
Support the door assembly firmly before removing
the top screw.
3. Remove the door assembly by lifting and pulling
outward from unit.
4. Place door assembly face down on a soft flat
surface.
5. Remove the catch plate from the front panel.
Rotate and reinstall it in the position vacated by the
hinge.
6. Remove the five screws (black arrows) and the two
screws (white arrows) that attach the inner door
assembly to the outer door assembly. Lift the inner
door assembly out of the outer door assembly.
7. Remove the screws that attach the hinge (white
arrows) and strike plate (black arrows).
8. Rotate the hinge and strike plate and reattach them
to the opposite sides of the inner door.
35