Removal Of Belt; Removing Belt - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Reparation instructions

Removing belt

Rider Pro 15
Starting point when removing belt:
• There is no deck mounted on the Rider.
• The front part of the belt is hanging loose.
The complete belt is only removed as shown below
when a snow blade is to be fitted on the Rider.
1. Release the belt guide and support belt pulley.
2. Release the wheel on the belt tensioner.
3. Take off the belt from the middle wheel and
remove the belt.
The belt is replaced in the reverse order.
46
– Svenska
www.mymowerparts.com
Removing the belt
Starting point when dismantling the belt:
• No unit attached to the Rider.
• The front of the belt is hung around the hook
guard's handle.
For a description of how to prise the front part of the
belt off the front pulley see steps 2–3 under "Remo-
ving the cutting unit".
The entire belt is only dismantled as set out below,
when the snow plough is fitted on the Rider.
1
Dismantle the steering plate under the support
wheel. Use two 13 mm socket spanners.
2
Unhook the spring on the blade brake. Pry off the
belt from the intermediate pulley and remove the
belt.