Husqvarna Rider Pro 15 Workshop Manual page 37

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
Reparation instructions
6
• Lower the garage jack and pull out the
hydrostatic transmission.
• Installation of the hydrostatic transmission is
carried out in the reverse hydrostatic transmis-
sion removing order
• After replacing, check that the brake wire and
speed control are correctly adjusted (see
Checking and adjusting of brake wire" and
"Checking and adjusting of speed control").
Check also the oil level in the tank, and bleed or
top up if necessary.
• Check and adjust the neutral position switch if
necessary.
• On Rider ProFlex 21 the wire to the differential
lock should also be checked and adjusted, see
"Checking and adjusting of the differential lock
wire".
• Check the hydrostatic transmission's oil level
after test running, and top up if necessary.
36
– Svenska
www.mymowerparts.com