Engine - Husqvarna Rider Pro 15 Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
The transmission's serial number is stated on the
barcode decal located on the front of the housing
on the left-hand drive axle:
• The type designation is stated above the
barcode and starts with the letter "K".
• The serial number is stated above the barcode
and has the prefix "s/n".
• The manufacturer's type number is stated under
the barcode and has the prefix "p/n".
State the type designation and serial number when
ordering spare parts.

Engine

New Husqvarna Rider professional machines have
two-cylinder, air-cooled engines from Kawasaki.
Major engine repairs are not described in this
workshop manual. This information can be read in
Kawasaki's own manuals, which contain detailed
information on the adjustment and repair of the
engines. The manuals can be ordered at an
authorised service workshop.
The table below shows the model number for
respective Rider models. These should be given
when ordering manuals:
Model
Rider Pro 15
Rider ProFlex 18
Rider ProFlex 21
It is important to only use genuine spare parts when
repairing the engines. The warranty will no longer
be valid if other parts are used.
Kawasaki's engine type
FH451V-AS50
FH531V-AS50
FH6411V-AS50
www.mymowerparts.com
Rider Pro 15, ProFlex 18 and Rider ProFlex 21
have two-cylinder, overhead valve engines with
pressure lubrication and separate oil filters. These
engines are fitted with catalytic converters, which
reduce the emission of hydrocarbons and nitrogen
oxides by up to 65% and carbon monoxide by up to
45%.
Design and function
17
Svenska –