4.2 Cable Connection
1
2
70
Attach the miniSAS cables to the ETERNUS2000.
Insert the miniSAS cable connectors in the ETERNUS2000 controller 0 (CM#0) and controller 1
(CM#1) SAS ports.
If only one of a CM's SAS ports is to be used, it should be the "0" port.
CAUTION
• The SAS cables should be positioned so that they will not
Attach the miniSAS cables to the server.
Insert the other end of each miniSAS cable in one of the server's SAS adapters.
Copyright 2009 FUJITSU LIMITED
Do
obstruct replacement of the power supply units or controllers
by the maintenance engineer.
ETERNUS2000 disk storage system User Guide
P3AM-2512-03EN