4.3 ETERNUS2000 Setup
4
5
6
100
Specify the volume name, type, and capacity, and click the
Figure 4.14 Volume creation screen
Volume number and name is displayed in the list of creating volume.
Click the [Next >] button.
The conditions of volumes to be created appears.
Check the conditions. If you agree, click the [Finish] button.
Figure 4.15 Volume creation confirmation screen
The volume is created. The volume is automatically formatted after the volume is created.
After completing the setting successfully, the Setting5 screen is closed.
Copyright 2009 FUJITSU LIMITED
ETERNUS2000 disk storage system User Guide
(Register) button.
P3AM-2512-03EN