Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01349
Rev: -
6
6.1
Symbol area
Information area
Soft key area
6.2
Symbol
Operating Instructions Fire alarm system EBL512 G3, V1.1.x
The display (LCD)
Areas in the display
Menu
Next zone
The display is divided in three areas:
The symbol area: Some events are indicated with symbols, see 6.2
below.
The information area: General area for all kind of information
and the menu system.
The soft key area: The function of a soft key is shown here and
may vary depending on the situation, convention and language.
If no text is shown, the soft key has no function.
"Evacuate" is not used this soft key may be used for "Alert
Annunciation acknowledge". In the New Zealand convention it
is used for "Acknowledge alarm". ).
Silenced Alarm devices is indicated to the right in this area.
The symbol area
The symbol area is at the top of the display, see 6.1 above.
The symbol area
Indicating
Door open.
Any c.i.e. door in the system is opened. See also page 35.
Also valid for ext. FBPs.
Loss of mains.
Any c.i.e. or ext. power supply in the system is out of 230 V AC.
The week average sensor value is over the service level for one or
more analog smoke detectors in the system. See also page 111.
Note that the symbol area may be suppressed see 6.3.
21
Re-enable
Evacuate
When
Advertisement
Table of Contents
