Table of Contents
Advertisement
Safety instructions | A15VSO/A15VLO series 12
• Use of assembled parts (e.g. control unit, valves) not in combination with the
specified Rexroth components
• Use of the axial piston unit with assembled parts under water at a depth of
more than 10 meters without the necessary additional measures, e.g. pressure
equalization. Units with electrical components (e.g. sensors) must not get
into contact with water, depending on the IP protection class� Observe the
IP protection class in the data sheet92802.
• Use of the axial piston unit under a continuous pressure differential between
housing and ambient pressure greater than 2 bar, with the ambient pressure
always lower than the case pressure. Momentary (t < 0.1 s) pressure peaks of
up to 5 bar are allowed. Beyond this, the maximum permissible case pressure
specified in the data sheet should not be exceeded.
• Application of the axial piston unit in explosive environments unless the
component or machine/system has been certified as compliant with the
ATEX Directive 2014/34/EU
• Use of the axial piston unit in a corrosive atmosphere
• Use of the axial piston unit in aircraft or spacecraft
2�4 Personnel qualifications
The activities described in this documentation require a basic understanding
of mechanics, electricity and hydraulics, as well as familiarity with associated
technical terms. For transporting and handling the product, knowledge regarding
the use of lifting devices and lifting accessories is required. In order to ensure safe
use, these activities should only be performed by skilled personnel or an instructed
person under the direction and supervision of skilled personnel.
Skilled personnel refers to persons who possess the professional training,
knowledge and experience, as well as the understanding of the regulations relevant
to the work to be done that are necessary to recognize possible dangers and take
the appropriate safety measures. Skilled personnel must follow the rules relevant
to their field and have the necessary hydraulic expert knowledge.
Hydraulic expert knowledge includes:
• Being able to read and fully understand hydraulic circuit diagrams
• In particular, fully understanding the relationships with regard to safety devices
• Knowledge regarding the function and interaction of hydraulic components.
Bosch Rexroth offers you measures supporting training in specific areas.
You can find an overview of the training contents on the Internet at:
www.boschrexroth.com/training�
RE 92802-01-B/2023-03-27, Bosch Rexroth AG
9/60
Advertisement
Table of Contents
