Bosch rexroth 12 Series Instruction Manual page 34

34/60 A15VSO/A15VLO series 12 | Installation
Bosch Rexroth AG, RE 92802-01-B/2023-03-27
3
X (LRDRS0)
Fig� 9: Removing transport protection
1 Protective cover
2 Threaded plugs
3 Protective plug
4 Steel flange covers (the flange
cover on the suction port provides
a secure stand and protection for the
V stop)
g max
Ports intended for connecting lines come with protective plugs and/or
threaded plugs, which serve as transport protection. Connect all ports required
for functional operation (see Table 9 "Ports A15VSO/A15VLO series 12"
on page 38). Non-compliance could lead to malfunctions or damage. If a port
is not being used, plug it with a threaded plug since the protective plugs are not
pressure-resistant.
Important for LRDRS0 controllers! Port X is equipped with a protective
plug (3). This port must be connected. Non-compliance could lead to
malfunctions or damage.
You will find other ports for the respective control in the data sheet 92802�
2
1
5
4
or
4
5 For version with through drive,
protective cover and mounting bolts