Problem
The kneading blade rattles.
"1" appears on the display and
operation has been stopped.
"H01", "H02" appears on the
display.
"U50" appears on the display.
Power supply
Power consumption
Capacity
Timer
Dimensions )W × H × D(
Weight
Accessories
Puzzle
This is because the kneading blade fits loosely on the kneading mounting shaft. )This is not a fault.(
Display exception
When the power supply to machine is interrupted for a certain time, the display shows "1" after
recovered. )It is standby mode and machine could not continue the program.(
→
Remove the bread, dough or ingredients and start again using new ingredients.
The display indicates a problem with the machine.
→
Consult the place of purchase or a Panasonic service centre.
The machine is hot )above 40 °C (. This may occur with repeated use.
→
Allow the machine to cool down to below 40 °C before using it again )U50 will disappear(.
Specifications
)Strong flour for a bread(
)Strong flour for a dough(
)Dry yeast(
)Baking powder(
1 measuring spoon, 1 measuring cup
Cause and Action
230 - 240 V
50 Hz
505 - 550 W
max. 600 g
max. 500 g
max. 7 g
max. 13 g
Digital timer )up to 13 hours(
Approx. 40.8 × 36.2 × 25.2 cm
Approx. 6.5 kg
min. 400 g
min. 250 g
min. 2.8 g
min. 10 g
EN21