Changing Data Stored In Memory; Memory Shift)... 3. .6..002 Sees Ges - Kenwood TM-732A Instruction Manual

7. Changing Data Stored in Memory
Two methods have been provided to alter the contents
of a memory channel.
©Entering new data into a memory channel will erase
the old data. (See page 25 for details on entering
data.)
Note
Entering new receive data in an odd split memory
channel will erase the previous transmit frequency
also. It will be necessary to enter both frequencies if
you wish to keep that channel as an odd split memory
channel.
OClearing an individual memory channel
1. Press the BAND SEL key for the desired band.
2. Press the MR key.
3. Select the memory channel that you wish to clear.
4. Press and hold the F key and then press the MR
key.
Note
The contents of memory channel number 1 cannot be
cleared with this procedure.
8. Memory Shift
Using this function you can copy the contents of a
memory channel or call channel to the VFO without
changing the data in memory. This will allow you to
begin tuning at the point specified by the memory
channel data.
1. Select the desired Memory Channel.
2. Press the F key.
3. Within 10 seconds of pressing the F key press the
VFO/MP V key to copy the data.
Note
Only the receive frequency data in the odd split
memory channels is copied to the VFO.
39