Table Of Contents - Kenwood TH-77A Instruction Manual

CONTENTS
1. BEFORE OPERATION
2. SPECIFICATIONS and ACCESSORIES
3. BATTERY PACK
4. OPERATION
44
4-2 RECEIVER OPERATION
4-3 TRANSMITTER OPERATION
4-4
4-5 SCAN
OPERATING CONTROLS ............
Receiver Operation
Frequency Selection
Frequency Step Selection
Programmable VFO Tuning Limits
A.B.C.( Automatic Band Change )
UXU(430MHz Band Simultaneous Reception)
MEMORY
Microprocessor Memory Back-up
Microprocessor Initialization | Memory
Channel Memory Contents Memory Entry
Memory Channel Recall Memory Shift
Memory Recall when the Keyboard Cover is
Installed
Scan Options Hold/Resume Programming
Band Scan Programmable Band Scan MHz
Scan Memory Channel Scan VFO/Memory
Channel Scan Call Scan
V/M/C (VFO/ Memory /Call) Scan Memory
Channel Lockout Priority Alert Function
4-10
4-11
4-12
6. MAINTENANCE
7. OPTIONAL ACCESSORIES
REPEATER OPERATION: steer, cprtee geen een
Transmitter Offsets Reverse Function Tone
and CTCSS Operation Autopatch Operations
DTMF MEMORY FUNCTION
DTSS
DTSS Code DTSS Code Selection Using the
DTSS Function Using DTSS with a Repeater
PAGING
Paging Code Memories Setting the Paging
Code Paging Transmission (Calling) Paging
Reception (Wait) Code Lockout
TONE ALERT SYSTEM
BATTERY SAVER
AUTOMATIC POWER OFF
5. BLOCK DIAGRAM and SCHEMATIC DIAGRAM
another sheet
In Case of Difficulty
4
49