Kenwood TH-77A Instruction Manual page 25

(an)
rn os et eae
quand = LAG 35%
BS APO
(ex)
(ex)
NOTE
When nothing is stored in a memory an error
sound is heard recalling the memory.
@ To confirm the contents of the split channel
-—+
ai wo tt
ee HEE yeh. OLN
=
. Press the memory channel number key. The
programmed RX frequency appears on the display
with "—" and "+" offset direction indicators. This
indicates that this channel has an odd split entered.
. To check the TX frequency press the REV key or the
PTT switch. The transmit frequency will appear in the
display.
nm
in Call Channel entry
. Select the desired Call channel frequency, tone data
etc in the VFO mode using the ENT key and numeric
keys.
. Press the M key momentarily then press the CALL key
within 10 seconds of pressing the M key .
3. Odd split Call channel
Select the desired Call channel TX frequency, tone
data etc .
. Press the M key momentarily,
. Press and hold the PTT switch and press the CALL key.
. Release the PTT switch.
i)
our
@Clearing a Memory Channel
If you want to clear the contents of an
memory channel use the following procedure.
1. Select the memory channel you wish to clear.
2. Press the M key, F key, then ENT key.
3. The selected memory channel number will disappear
and the next active memory channel will appear.
individual
25