Cuisinart FS-75 Series - Kitchen Pro Food Slicer Manual
  1. Manuals
  2. Brands
  3. Cuisinart Manuals
  4. Kitchen Appliances
  5. FS-75 Series
  6. User manual

Cuisinart FS-75 Series - Kitchen Pro Food Slicer Manual

Also See for FS-75 Series:

Advertisement

Table of Contents
Contents
Cuisinart FS-75 Series - Kitchen Pro Food Slicer Manual

IMPORTANT SAFEGUARDS

For your safety and continued enjoyment of this product, always read the Instruction Book carefully before using.
When using electrical appliances, basic safety precautions should always be taken, including the following:

  1. Read all instructions.
  2. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
  3. Blade is exceptionally sharp. Handle very carefully.
  4. To protect against risk of electrical shock, do not put appliance in water or other liquids.
  5. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
  6. Avoid contact with moving parts.
  7. Never put the unit near a hot burner, in an oven, or in a dishwasher.
  8. Do noToperate the Cuisinart® Food Slicer, or any other electrical equipment, with a damaged cord or plug or after the unit malfunctions or is dropped or damaged in any manner. Return unit to the nearest authorized service center for examination, repair, or adjustment.
  9. Do not use outdoors.
  10. Do not let cord hang over edge of a table or counter, come into contact with sharp edges, or touch hot surfaces.
  11. Do not pull on the power cord to disconnect.
  12. Never plug in the appliance where water may flood the area.
  13. Place the appliance on a firm and stable surface.
  14. NEVER PUT YOUR FINGERS NEAR THE BLADE WHILE IT IS IN OPERATION.
  15. Ensure that the appliance is not placed close to the edge of the table, worktop, etc., where it can be pushed off or fall.
  16. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
  17. Never use abrasive cleaning agents or abrasive cloths when cleaning the unit.
  18. The Cuisinart® Food Slicer has a sharp blade. To avoid injury, never hand-feed food to be sliced. Always use the unit when completely assembled with food carriage and food press.
  19. This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit the outlet perfectly, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
  20. Do not leave the Cuisinart® Food Slicer unattended while it is running.
  21. Always place hand on food guide when slicing.
  22. Never place hand behind food carriage.
  23. Do not use this food slicer without food guide.
  24. To avoid injury, never use hand to push food when slicing.
  25. Unplug before cleaning.
  26. Do not use for any other purpose than it's intended use.
  27. Do not operate your appliance in an appliance garage or under a wall cabinet. When storing in an appliance garage always unplug the unit from the electrical outlet. Not doing so could create a risk of fire, especially if the appliance touches the walls of the garage or the door touches the unit as it closes.

SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

In case of any maintenance operations or repairs not specifically stated in this manual, please refer to a qualified service center recommended by Cuisinart. Always read the instructions for use carefully before using and keep them in a place where they can be referred to whenever necessary.

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit the outlet perfectly, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

IMPORTANT UNPACKING INSTRUCTIONS


THE SLICING BLADE HAS A VERY SHARP EDGE.

To avoid injury when unpacking the unit, please follow these instructions:

  1. Put the box on a large, sturdy, flat surface.
  2. Remove the instruction book and any other literature.
  3. Position box on its side. Slide the packaged unit out of the box.
  4. Remove the Styrofoam® inserts.
  5. Carefully take the Cuisinart® Food Slicer out of the plastic bag. Please use extreme caution in removing the rubber guards from slicing blade area. We suggest you save all the packing materials in the event that future shipping of the machine is needed.

Keep all plastic bags away from children.

REPACKING INSTRUCTIONS

  1. Put food slicer on a large, sturdy, flat surface.
  2. Put food slicer into plastic bag.
  3. Position Styrofoam® inserts on each end of food slicer.
  4. Put the packaged unit into the upright box.
  5. Replace top corrugation, instruction book and any other literature.

INTRODUCTION

ANY WAY YOU SLICE IT!
The Cuisinart® Food Slicer eliminates one of the most time-consuming jobs in food prep. This commercial-quality slicer adjusts from 1⁄32"(0.8mm) to ½"(15mm) to let you slice everything from paper-thin pepperoni to perfect servings of roast beef. It makes life a little more fun, and entertaining as easy as 1-2-3!

TIPS FOR USING YOUR CUISINART® FOOD SLICER

The Cuisinart® Food Slicer does a great job on a variety of foods. Throwing a great dinner party is as easy as 1-2-3. Start with a simple and delicious antipasto appetizer of sliced cheese, salami and French bread. For best results, always use a hard cheese that has been refrigerated. Slicing the salami and then the French bread will allow for an easier cleanup. Then, move on to slice salad ingredients, potatoes for potatoes au gratin, and even roast beef.

Homemade apple pie can be fast and delicious when the Cuisinart® Food Slicer does all the slicing work for you.

A child's birthday party can be fun and easy. Just slice all your ingredients for pizza in advance, and the children can have a great time making their own pizzas.

Having a summer barbecue is effortless with the Cuisinart® Food Slicer. Tomatoes, onions, cheese and even lettuce take no time at all to prepare.

For all your slicing needs, from paper thin to extra thick, the Cuisinart® Food Slicer makes food preparation fast and easy.

PARTS

PARTS

  1. ON/OFF Switch
  2. Slice Control Knob
  3. Non-Slip Feet
  4. 7.5" Stainless Steel Blade
  5. Food Guide
  6. Plastic Safety Guard
  7. Removable Stainless Steel Slicing Carriage
  8. Center Hub for Blade Removal

USE AND CARE

  1. To use your Cuisinart® Food Slicer, place on a sturdy, flat surface.
  2. Check that the switch is turned OFF before plugging in the appliance.
  3. Adjust the slice control knob to desired slicing thickness (1/32" 0.8mm to ½" 15mm).
  4. Position food to be cuTon the stainless steel carriage and secure with plastic safety guard.
  5. Turn the Cuisinart® Food Slicer ON.
  6. Position hand on food guide handles and smoothly slide carriage backward and forward. NEVER USE YOUR FINGERS.
  7. To ensure even slicing, do not press the food against the blade too firmly.
  8. At this point, check for desired thickness and adjust accordingly with the slice control knob.
  9. Continue to slide food carriage back and forth in an even and steady motion.
    warningNOTE: Food carriage is removable for cleaning.
  10. After all your slicing is done, turn the slicer OFF and unplug.

The Cuisinart® Food Slicer has been designed to operate for short periods (maximum 10 minutes). Do not run for more than 10 minutes in constant use. Allow it to cool before using it again. If the power cord is damaged, a service center recommended by the manufacturer must repair it.

CLEANING AND MAINTENANCE

Always unplug your Cuisinart® Food Slicer and turn the slice control knob back to zero before cleaning the appliance. DO NOT PUT THE APPLIANCE IN WATER. This could cause damage to electrical parts.

  1. Clean and dry all parts immediately after use.
  2. Fold out food carriage away from the base for easy cleaning of crumbs, seeds, etc.
  3. To remove food carriage for cleaning, hold food carriage with two hands and tilt frontward toward you. There is a button to release the carriage marked "Press to release." Press, release, and wash with warm, soapy water. Dry thoroughly. To reassemble, align top part of food carriage to bottom part of food carriage and click into place.
  4. To remove blade, press in tab where indicated in center hub; twist clockwise and carefully lift and remove blade.
  5. With a soft sponge or cleaning cloth, clean both sides of blade with mild soap and water. Rinse and dry blade thoroughly.
  6. To replace blade, hold tab, aligning the blade with the drive gears so it engages fully. Turn tab counterclockwise to tighten.
  7. Any other servicing should be performed by an authorized service representative.

DO NOT WASH ANY PART OF THIS SLICER IN A DISHWASHER.

TECHNICAL DATA

CARRIAGE SURFACE: Stainless Steel
Blade: Stainless Steel
POWER: 130W 120V/60Hz

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Cuisinart FS-75 Series - Kitchen Pro Food Slicer Manual

Advertisement

Need Assistance?

Do you have a question about the FS-75 Series that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Related Manuals for Cuisinart FS-75 Series

Save Article as PDF

Table of Contents